SMB Connectors

SMA ConnectorSMB connector is smaller than SMA RF connector. SMB connector is designed to have snap-on coupling. Besides, SMB connector series are available for RF cable types, PCB type and edge mount type. SMB connector commonly is used for 0~4GHz (50ohm) and 0~2GHz (75ohm).

Wellshow Technology manufactures various SMB connectors and custom SMB RF cable assemblies in Taiwan. We can provide good quality SMB connector in short time and welcome OEM or customized RF connector. Contact us by email or call us 886-2-24270488 to start business!

SMB Connector Series

All SMB Connector

SMB Plug Connector

SMB Jack Connector

Information


SMB Connectors is a smaller version of the SMA with snap-on coupling and was designed in 1960’s. The snap-on design permits rapid connection and disconnection in limited spaces.

50 ohm SMB usually is specified up to 4 GHz, and 75 ohm SMB connectors are specified for only 2 GHz.

SMB series was designed originally with female contact in male body or male contact in female body. These connectors are popularly used in telecommunication and automotive, GPS tracking, GSM cellular, WLAN equipments.

Product Range

  • Cable Connectors (straight and right angle) for flexible, semi-flex and semi-rigid cables
  • PCB connectors (straight and right angle)
  • Panel connectors in various flanges
  • Adaptors

Application

  • Cable Assembly
  • PC/LAN
  • Telecommunication
  • Automotive(GPS)
  • Radio Boards
  • Test and Measurement
  • Components
  • Process Controls
  • Video Systems
  • Instrumentation

 

Dimensions

SMB Interface Dimensions

SMB Plug Connector Interface

SMB Plug Connector Interface

SMB Jack Connector Interface

SMB Jack Connector Interface

 

Specification

SMB Connector Technical Characteristics

Electrical
Impedance 50 ohm or 75 ohm
Frequency range 0 ~ 4 GHz for 50 ohm
0 ~ 2 GHz for 75 ohm
VSWR Straight type ≤ 1.3 max.
R/A type ≤ 1.5 max.
Dielectric withstanding voltage 1000 V rms min. for RG316, RG402
750 V rms min. for RG178
Working voltage 335 V rms max. for RG316, RG402
250 V rms max. for RG178
Center contact resistance ≤ 6.0 mΩ (Milliohms max.)
Outer contact resistance ≤ 1.5 mΩ (Milliohms max.)
Insulation resistance ≥ 103 MΩ (Megohms min.)
Mechanical
Coupling Snap-on
Contact Retention 4 lbs min.
Mating Durability 500 cycles min. (For Beryllium copper contact only)
Environmental
Temperature Range Teflon −65ºC ~ +155 ºC
Vibration MIL-STD-202 Meth. 204
Corrosion resistance MIL-STD-202 Meth. 101
Materials
Body Brass
Insulator Teflon
Center contact Brass for male,
Beryllium copper or Phosphor bronze for female
Crimping sleeve Annealed Brass
Body plating Gold (Au)
Center contact plating Gold (Au)